Needle Sensors
or as they are commonly referred to, Immersion sensors.

 

---

Insertion Sensor

• Available with liquid or gas tight fittings
• Various sheath and lead lengths available upon request

Specifications
Sensing Tip............................................ diameter as ordered
Handle ....................... 2.5” long x 0.625” diameter aluminum Powder coated
Lead ..........................................................32”length stainless steel woven over braid w/ #20 gauge thermocouple grade Teflon® insulated and twisted
Accuracy ....................................................... ±3°C @ 300°C
Response time .......................... 5 seconds to 95% of reading

Model	Temp.	Junction	Alloy	T/C	Diam.	Length	Termination	$
NI= Insertion	06=320°C 600°F (E, J, K, & T) 15=815°C 1500°F (E, J, & K) 20=1090°C 2000°F (E, & K) 25=1370°C 2500°F (K only)	G   G	S4   S0	E, J, K, or T	D=0.125" V=0.188" A=0.250" C=0.313" G=0.375"	4=4" 6=6" 8=8" 10=10" 12=12"	M=Mini plug P=Phono plug (Analog) C=Coil cord with Mini plug L=Standard plug U=Un terminated A=Spade lugs (Analog) E=Mini plug- no lead R=RT - use DRT handle	78 78 78 78 78 78 57 57
NOTE: Change G to U for ungrounded junction and add $5 to final price NOTE: T max temperature is 400°C NOTE: For lengths over 12 " add $2 per inch to final price maximum length 24"

PART NUMBER
To make a part number Use the RED letters and add the prices as required.

Example:

Insertion sensor with grounded junction for operation at 1100°C with 32" lead with mini plug, thermocouple type K, with a diameter of 0.250" and a length of 8 " in type 310 Stainless steel.
NI + 25 + G + S0 + K + A + 8 + M = $78

Final part # is NI25GS0KA8M @ $78.00 each.

return to top

 

Tapered cone

 

• Sharp, rugged, hardened tip 55 Rockwell "C"
• Ideal for penetrating semi solids and asphalts
• Various sheath lengths and lead lengths are available

Specifications
Sensing Tip............................................. diameter as ordered
Handle ........................2.5” long x 0.625” diameter aluminum powder coated
Lead ........................................ 32” long stainless steel woven over braid, #20 gauge stranded thermocouple grade wire, Teflon® insulated and twisted
Accuracy ........................................................±3°C @ 300°C
Response time ...........................5 seconds to 95% of reading

Model	Temp.	Junction	Alloy	T/C	Diam.	Length	Termination	$
NTC = Tapered cone	06=320°C 600°F (E, J, K, & T) 15=815°C 1500°F (E, J, & K) 20=1090°C 2000°F (E, & K)	G   G	S4	E, J, K, or T	D=0.125" V=0.188"	2=2" 4=4" 6=6" 8=8" 10=10" 12=12"	M=Mini plug P=Phono plug (Analog) C=Coil cord with Mini plug L=Standard plug U=Un terminated A=Spade lugs (Analog) E=Mini plug- no lead R=RT - use DRT handle	95 95 95 95 95 95 74 74
NOTE1: T max temperature is 400°C NOTE2: N  -  Handle 6” x 9/16” Stainless steel handle with nylon impact resistant guard and strain relief, for use on tapered cones to aid in penetration of wooden crates or where the user finds difficulty in piercing the object under test.  $124.00 NOTE3: Standard Tapered cone sensors are offered in type 304 Stainless Steel, if other alloys are needed please request a price quote.

PART NUMBER
To make a part number Use the RED letters and add the prices as required.

Example:

Tapered cone with grounded junction for operation at 600°C with 32" lead with mini plug, thermocouple type J, with a diameter of 0.125" and a length of 4 " in type 304 Stainless steel.
NTC + 15 + G + S4 + J +D + 4 + M = $95

Final part # is NTC15GS4JD4M @ $95.00 each.

 

 

return to top

 

Bendable needle

 

 

 

• Magnesium oxide insulated thermocouples covered with a soft annealed Stainless Steel sheath
• Accepts any bend and will follow any contour
• Manufactured in blunt style only
• Various sheath and lead lengths available upon request

Specifications
Sensing Tip .............................................. diameter as ordered
Handle ...................................................... 2” x 0.343” long ceramic
Lead .......................................................... 32” length w/Stainless Steel over braid, #20 gauge thermocouple grade wire, Teflon® insulated and twisted
Accuracy .................................................... ±1.5°C @ 300°C
Response time ........................................ 3 seconds to 95% of reading

Model	Temp.	Junction	Alloy	T/C	Diam.	Length	Termination	$
NS = Soft bendable	15=815°C 1500°F (E, J, & K) 20=1090°C 2000°F (E, & K) 25=1370°C 2500°F (K only)	G	S0	E J K	K=0.063" F=0.072" D=0.125"	2=2" 4=4" 6=6" 8=8" 10=10" 12=12"	M=Mini plug P=Phono plug (Analog) C=Coil cord with Mini plug L=Standard plug U=Un terminated	78 78 78 78 78

PART NUMBER
To make a part number Use the RED letters and add the prices as required.

Example:

Bendable needle with grounded junction for operation at 800°C with 32" lead with mini plug, thermocouple type E, with a diameter of 0.063" and a length of 6 " in type 310 Stainless steel.
NS + 15 + G + S0 + E +K + 6 + M = $78

Final part # is NS15GS0EK6M @ $78.00 each.

To buy Now, please click here for a connection to the Online store.

 

return to top

 

 

Teflon Coated needle

• Anodizing Baths
• Plating Baths
• Battery Electrolyte
• Corrosive Environments
• Rated to 260°C (500°F)
• Abrasion Resistant
• Chemically Inert
• Electrically Insulated
• Made with Special Limits of Error Material

 

 

 

Specifications
Sensing Tip ........................................ diameter as ordered
Handle ................................................. 2 1/2 ” long x 5/8 ” diameter powder coated Aluminum
Lead ..................................................... 32” length w/Stainless Steel over braid, #20 gauge thermocouple grade wire, woven fiber glass insulation
Accuracy ............................................. ±1.0°C @ 300°C ±1.0°C uncertainty
Response time ................................. 3 seconds to 95% of reading

Model	Temp.	Junction	Alloy	T/C	Diam.	Length	Termination	$
NIA =Blunt PFA teflon coated needle	05=260°C 500°F (E, J, & K)	U	S4	E J K T	D=0.125"	6=6" 10=10" 12=12"	M=Mini plug C=Coil cord with Mini plug L=Standard plug U=Un terminated E=Mini plug- no lead	104 104 104 104 83
NOTE: T max temperature is 400°C NOTE: Maximum length is 22" NOTE: Other diameters available on special order

PART NUMBER
To make a part number Use the RED letters and add the prices as required.

Example:

Blunt Teflon® coated needle with ungrounded junction for operation at 300°C with 32" lead with mini plug, thermocouple type K, with a diameter of 0.125" and a length of 10 " in type 304 Stainless steel.
NIA + 05 + U + S4 + K +D + 10 + M = $104 + 5 =$109

Final part # is NIA05US4KD10M @ $109 each.

 

 

return to top

 

 

 

 

---

 

(1-800-342-5335)

Phone: 434-799-0807

Fax: 434-799-0847